P-200FDQII series dry-cleaning machine
- Product Detail
Performance Introduction:
(1)The machine uses high quality stainless steel structure, where the dissolving touch the inside of the rotor cage, cage, outer air duct, filter, trap, distillation box, oil-water separator, solvent pipeline and other parts are made of high quality stainless steel finishing; hot dip galvanized advanced anti-corrosion technology by solvent tank, average design service life of 10 years, is several times ordinary carbon steel dry-cleaning machine life。
(2)A high level of mold production, ensure parts of high strength, beautiful appearance, good interchangeability。
(3)Full automatic computer control system, manual, automatic switch, can be prepared several sets of automatic washing done automatically。
(4)Inverter, low-voltage electrical, pneumatic systems are all imported and domestic famous brand, to ensure the stable operation of the machine long time。
(5)Guide the international forefront of washing machine technology of large-diameter in-line duct structure, effectively reduce the wind resistance, large volume, fast recovery, the chorionic villi were collected more thoroughly.Collector by using a transparent observation hole of elaborate design, effectively reduce the times of opening, ensure your operating environment and health。
(6)New environment-friendly ecological filter high accuracy carbon core filter (patent technology international original) without the addition of dry cleaning filter powder, toner; eliminate maintenance cleaning, washing cleanliness is poor, the high cost of trouble; water saving, energy saving, raw material saving effect of extraordinary, washing light colored clothing is unparalleled。
(7)Three sets of large solution storage tank automatic cleaning windows, without having to open up。
(8)Distillation is heated by external steam, safe, and reliable; produced by distillation heat can enter the drying duct two utilization, energy utilization remarkable economic, energy-saving expert real; and with the liquid level automatic control device, safe and reliable。
(9)Siemens high performance frequency conversion motor, can work continuously for a long time, drying speed linear lifting process tends to be more stable, the machine runs more stable。
(10)Refrigeration recovery system used in all the world famous product, ensure the economic and technical indicators of environmental protection energy-saving machine。
(11)Bearing spindle and filters, easy corrosion, wear parts, are used in Japan Seiko NSK bearing, seal with the Italy CCVI and other world famous products, bearing system daily work without maintenance。
(12)Two separation of oil-water separation device configuration, the solvent and water more thoroughly, environmental economy。
Main technical parameters
Specification |
unit |
P-200FDQII |
Water Capacity |
㎏ |
10 |
Washing Cylinder |
mm |
690×500 |
Washing Speed |
r/min |
40 |
Spinning Speed |
r/min |
400 |
Power of Washing Motor |
Kw |
0.60 |
Power of Spinning Motor |
Kw |
1.5 |
Power of Pump |
Kw |
0.75 |
Power of Air Blower |
Kw |
1.1 |
Power of Drying Heater |
Kw |
6 |
Distillation Power |
Kw |
7.2 |
Power of Compressor |
kw |
1.5 |
Noise |
dB(A) |
70 |
Weight of Whole Machine |
Kg |
1200 |
Weight of Packing Case |
Kg |
130 |
Power Supply |
V |
AC380V /50Hz |
Installde Capacity |
Kw |
18.6/5.4 |
Pressure of Inlet Water |
Mpa |
0.2--0.4 |
Pressure of Compressed Capacity |
Mpa |
0.4--0.6 |
Steam Pressure |
Mpa |
0.45—0.55 |
Water Consumption |
Kwh/h |
6/3 |
Water Consumption |
L/h |
180 |
Compressed Air Consumption |
L/h |
8 |
Steam Consumption |
Kg/h |
35 |
Contour Dimension |
Mm |
1770×1350×1950 |
Contour Dimension of Pac |
Mm |
1900×1500×2100 |
Power Input Wire |
mm² |
10/4 |
Compressed Air Inlet |
Mm |
ф8 |
Water outlet |
inch |
DN15 |
Water Inlet |
inch |
DN15 |
External Steam Inlet |
inch |
DN15 |
External Steam Outlet |
inch |
DN15 |